Aura - Up-and-over garage door

The Aura up-and-over door is a top-of-the-range door with a meticulous finish to satisfy the most demanding needs. It can be insulated 40 or 60mm.

It is of course motorized, by an operator ONE and two remote controls.

The wicket door included in the door is secured by a 3-point hook lock.

It is a door delivered pre-assembled (fully assembled at the factory).

Delivery within 2 to 4 weeks

From 2784

Presentation video

Measuring of up-and-over garage door

French made garage door

Insulated up-and-over garage door 40 or 60mm, 2 sides steel 0.35mm polyurethane foam 40/60 mm.

The Aura up-and-over door is from our professional range. It can be produced in 40 or 60mm. The wicket door includes a genuine 3-point hook lock for maximum security. In addition, there is a 2-point locking system on the floor of the door and a mechanical motor lock for the upper part. The gate is mounted on a continuous anodised aluminium hinge with an anti-unscrewing safety device. The frame and hinge are powder-coated in the same colour as the door for a neat finish. The interior and exterior handles are made of aluminium.

On the insulation side, the door leaf in 40 or 60mm panels is framed with our double-lip ZY profile seals to limit thermal bridges.

On the mechanical side, balancing is ensured by two multi-spring arms for greater safety and easy maintenance. The guidance by two horizontal rails and ball bearing rollers provides high operating stability and durability.

This garage door is delivered to you pre-assembled with illustrated assembly instructions in French, written by our design office (see Documentation tab).

Coefficients of thermal resistance

Ud = 0.56 - 0.51 W/m²K for panel only

Ud = 0.95 - 0.91 W/m²K for the complete deck (= assembled panels)

Ud = 1.48 - 1.43 W/m²K for an installed door, taking into account installation on a standard substrate.

Dimensions

Available in 6 standard sizes:

W2400 / 2500 / 3000 mm and H2000 / 2125 mm

or custom-made:

Width from 2000mm to 3500mm
Height from 1850mm to 2400mm

The minimum distance between the mounting brackets is 55 mm to install this up-and-over door (see measurements 3 and 4 of the dimensional drawing). The lintel drop must be at least 120 mm (measure 5 on the diagram).

The + products

bullet Excellent thermal and sound insulation
bullet Wicket door with 3-point lock
bullet 2-point ground locking
bullet Insulation possible in 60mm

bullet Fully mechanical anti-lift safety device on the engine
bullet Robust steel mechanics
bullet Motorized with 2 remote controls & very simple settings