Locks and handles for up-and-over garage door

We offer a wide selection of locks and all the necessary accessories to secure your overhead garage door.

Our lock boxes easily fit most overhead doors on the market. We also offer the option to purchase individual lock cylinders in a wide range of sizes to fit all door insulations, as well as handles or escutcheon plates to replace worn or damaged elements of your existing lock.

Our 1 to 3 point locks offer reliable and robust security, but we also provide additional manual bolts to further increase the security level of your garage door.

If you can't find the lock you need, our team is here to help and advise you via chat, email, or phone. We provide detailed diagrams for each part on the product pages to help you find the most suitable solution.

We also offer a range of locks and bolts suitable for sectional garage doors.

External unlocking cylinder kit

Kit cylindre de déverrouillage porte de garage 20 à 40mm

Kit cylindre de déverrouillage de l'extérieur

Very useful for unlocking your engine from the outside in case of a power outage! Comes with 2 keys Originally designed for insulated panels 20 to 40mm If insulated 40mm or 20mm => use the standard kit without support If insulated 60mm or single metal (non-insulated) => use the ISO60 support (provided with 8 rivets)

€34.80

Additional lock

Additional side lock for garage door (per unit) Rod diameter: 12mm Supplied with 4 sheet metal screws 6.3x15 This side lock will add an extra locking point to your garage door. Drill the guide rail so that the side lock rod engages and thus blocks the opening. For more security, install one on each side of the door. Installation instructions: example of installation on a sectional door

€18.90

Lock case Fixed Part EP17 (Various models)

Coffre de serrure Partie Fixe EP17 sortie vers le bas

Coffre de serrure Partie Fixe 1 Point Cotation

Lock case for up-and-over garage door 60mm center distance For handle square 9x9mm Approx. dimensions 160x60x17mm + 1 plastic spacer + screw on outlet (M6 or M8) Several models: Simple outlet upwards or downwards, Double vertical or horizontal outlets

€34.80

1-Point Gate Lock Box

Central Lock Box for Gate 1 Point (per unit) Reversible lock box, suitable for both right or left gate of a tilt door. Distance between centers 70 mm Designed to accommodate European cylinder and handle with 8x8mm square spindle (not supplied)

€36.00

3-Point Lock Box for Gate

Coffre de serrure Portillon Centrale 3 Points

Lock box with 3-Point locking for up-and-over garage door wicket (unit) 70 mm center distance Designed to accommodate a European cylinder and handle with 8x8mm square (not provided) Two models: for left or right wicket (viewed from outside - see description in the illustrations opposite)

€79.80

Spring lock

This small latch, or spring-loaded lock, is fixed in the corner of the frame of your up-and-over garage door and allows it to be locked when closed. Supplied with a bracket (possibility to adjust the position of the latch laterally) Supplied with 3 sheet metal screws 6.3x15, 2 M6x30 bolts, and a shim Reversible bracket and latch Made of steel

€18.00

ALU plate + ALU handles for wicket door assembly

Plate + aluminium crutches set for lock case with 8mm x 8mm square 1 inside handle 1 outer handle with square 8mm x 8mm x 80mm 2 cleaning plates int/ext. 92mm centre-to-centre distance 2 slotted head screws M4 x 60 Available in anodised aluminium grey

€39.90

Black PVC plate + handles set for wicket door

Black PVC plate + black PVC lever handles for wicket door set

Black PVC handles and lever handle for garage door

Black PVC plate + crutches set - Distance between centres 70mm - Square 8mm Suitable for up-and-over Axone Spadonegarage doors. Check the dimensions for mounting on another brand of door. Scope of delivery : 1 inside handle 1 external handle 1 inner cleanliness plate 1 external cleanliness plate + screws 2 pins 1 square of 8mm x 8mm x 110mm

€24.00

Handle kit fixed part ALU anodized

Anodised aluminium interior/exterior plate and handle set for fixed part lock of up-and-over garage door - 60 mm centre distance - For 40mm isultated garage door Scope of delivery : 1 PVC inner handle 1 exterior handle anodized aluminium 1 external cleanliness plate alumium anodized + 4 screws 5x60 mm 1 square of 9mm x 9mm x 75mm

€58.80

Unlocking rocker kit for motorized tilting door

Up-and-over garage door release kit for motorised up-and-over garage door. This kit contains : 1 unlocking rocker 1 straight stock 1 cable Ø1.5mm with a ball about 1.8m long 1 bag of screws and bolts (1 crimp lead, 1 small washer, 4 sheet metal screws 6.3x25, 2 rings 10mm, 1 bolt M8x40 + lock nut)

€33.00

Additional lock kit for wicket door

This kit allows you to further secure the closing of your gate by adding an additional closing point. Possibility to install the lock in the upper part of the gate or in the lower part or other according to the desired ergonomics. Kit Contents : 1 additional lock, rod Ø 14mm 1 strike + support 1 bag of screws (4 washers + 4 M6 + 8 sheet metal screws 6.3x15)

€23.60

Metal Handle

Metal handle with key lock and 8mm x 8mm x 60mm square Supplied with 2 keys Supplied with 2 x M5x30 cross head screws To adapt or to equip an old garage door, for the handyman.

€12.90

Control cables for spring-loaded locks

Set of 2 cables for motorized garage door : - 1 cable Ø 1.2mm, length 7m - 1 cable Ø 1.2mm, length 1.8m with a ball at one end - 1 crimping lead Delivered without accessories

€24.00

Lock case 1 point Wicket door EURONORM CT

Lock case Wicket door 1 point door EURONORM CT

Lock box with 1-point locking, used in particular for the gate of the EURONORM CT tilting garage door Square size 8 x 8 mm Designed to accommodate a European cylinder This lock box is reversible. Simply push the bolt all the way in and turn it halfway.

€39.90

Lock case Fixed part HORMANN door

For Hormann or Tubauto up-and-over door 1 point (ref 1914000) or 2 lateral points (ref 1861/60) Size 138x64x23 approx Latch for locking from the inside Slot for European cylinder and 9x9 square handle (not supplied) Centre distance between handle and cylinder 60mm Stroke closed/open position approx. 37.5mm-60mm Spring return (exits out if you let go of the handle)

€49.80

Handle Int/Ext PVC Black

Attention: 9mm x 9mmsquare Interior / exterior handle for up-and-over garage door 1 inside handle 1 external handle with square of 9x9mm 2 sizes : L47mm or L85mm 2 adjusting screws included 6x15mm and 6x35mm Supplied without any other accessories Also compatible with Euronorm up-and-over doors

€15.60

Manual garage door lock bolt (the pair)

Galvanized steel lock bolt (bolts or rods) for garage door. Section 23mm x 11.5mm 3 lengths to choose from (can be cut with a simple hacksaw) One end with a notched end to screw on the side exits of your lock + 2 bent bolt guides + 2 guide plates + 4 sheet metal screws 6.3x15 Sold in pairs

€31.20

Automatic locking kit

1- or 2-point locking kit for motorised overflowing up-and-over garage door. This kit is designed to equip a motorised up-and-over garage door with a choice of : 1 central point on the ground 2 lateral points

€42.00

Cleanliness Plate Fixed Part

Cleanliness plate for an up-and-over door

Cleanliness plate for an up-and-over garage door Centre distance 60mm In black PVC With Spadone logo Dim 175x62x8mm approx. Delivered with screws 5x20 mm & inner counter frame Designed to receive the lock case (not supplied)

€12.00

Overhead garage door handle

Suitcase handle for hand operation of your up-and-over metal garage door Material PVC Supplied with 1 string Supplied with 2 screws Color: black or blue Fits most metal overhead doors on the market

€13.20

Pair of cylinders

Pair of cylinders and 3 keys. Only one key to open both cylinders! 1 Cylinder 10-27 1 Cylinder 27-35 3 Keys

€29.70

Locks for EURONORM up-and-over doors with hoops

These locks are designed for a EURONORM up-and-over door with hoops. 2 spring return locks 2 cables of 1.8m Ø1.5mm with ball 2 small fuses The locks are fixed in the lower corners of your door, just make 2 small loops to order the parts of the lock to be opened.

€28.80

Square additional bolt with striker

Additional lock for up-and-over or sectional garage door (the unit) Supplied with 8 sheet metal screws 6.3x16 Provided with a trigger to be fixed This lock will add an extra locking point to your garage door.

€17.40

Straight steel bolt 1 point locking

Cross-section approx. 12 mm x 23 mm, L590mm (may overlap) 1 bolt guide to be fixed in your door frame 1 ground-fixing cover 2 self-drilling screws 6.3x15 (for the guide) 1 M8 hexagon head screw lock box not included Can be used in 1 point downwards or upwards The tip can easily be flattened with a hammer if a pointed shape is required.

€21.60

Lock kit for single-wall tilting system

1 lock case EP17 , 1 bottom exit or 2 side exits Ent 60mm / square handle 9x9mm / 160x60x17mm approx. 1 plastic extension piece 1 cylinder 10-30 1 PVC handle inside + outside + screw M6x15 1 cleanliness plate + 4 screws 5x20 Ent 60mm / black PVC /175x62x8mm approx. Delivered with a plastic extension required for some doors to replace a 30 mm thick box.

€59.00

Tilt release bracket on metal door / motor securing plate

This steel part is used on non-insulated overhead doors and can have 2 functions: 1. It can make it easier to install the tipper on your frame profile. 2. It can be used to fix the engine ONElashing to the frame profile. More stable fixation Better hold during the draw Sold alone with 8 sheet metal screws 6.3x15

€13.20

Lock Wicket Door 3 Point Hook Lock

Hook model with handle lift Distance between centres 92 mm, face plate 24x6mm Designed to receive European cylinder and handle with 8x8mm square (not provided) Supplied with 3 strike plates + 12 rivets + 10 Phillips screws 5x10 The model is reversible at the bolt level, which makes it possible to mount this lock on the left as well as on the right.

€179.00

Stop for garage door gate

This blocker ensures the immobilization of a garage door gate in the open position against a wall or other Made of injected PVC, available in white or black Screws not provided, adapt according to the support Very easy to install: - Attach part A to the gate (preferably in a reinforcement) - Fix part B on the facing wall (or other) - Part A fits into part B for temporary holding of the gate in the open position

€7.20

Cylinders and Half-Cylinders of Locks

European format lock cylinder, compatible among others with garage doors. Easy to install and compatible with a wide variety of locks. Half-cylinders = Perfect for locks requiring a key from only one side, like the tilting garage door of a box. 2 or 3 Keys provided depending on the cylinder versions To know the size of your cylinder, remove the old one and measure it precisely.

€21.90

2-point horizontal lock for Novoferm door

Serrure à 2 points horizontaux pour porte Novoferm

Lock case for Novoferm up-and-over garage door reference 80480100, delivered with the plastic cover reference 80480200.This lock is compatible with up-and-over doors:- Novoferm DL with wicket door (2008 and later)- Novoferm DL without wicket door (2007 and later)- Novoferm Noviso 60mm center distance Two lateral outputs For handle square 9x9mm Dimensions 159 x 59 x 17mm

€69.90

We offer you a wide selection of high quality locks as well as all the necessary accessories to enhance the security of your High-end tilting garage door or economic. Our lock safes are designed to fit most of the open doors available on the market. You can also opt for the purchase of lock barrel, handles or plates of cleanliness separately. In addition to our 1- to 3-point locks, we also offer additional locks to easily increase the level of security of your closures.