Adaptation profiles for sectional garage door

Corner for cladding and finishing, in lacquered steel, thickness 10/10 with crushed edge folds. 3 dimensions:- 50 x 30 x 1250 mm- 80 x 30 x 1250 mm- 150 x 30 x 1250 mm 2 color options (outer face):- lacquered white- lacquered anthracite grey (RAL 7016) As this item is bulky, the delivery time may be slightly extended. Thank you for your understanding.

Steel renovation threshold bar for flat floor, length 2.5m or 3m. Forms a threshold for your garage door without needing masonry work. Very useful for renovations and when installing on a flat floor. For reasons of bulk and transport, this profile is cut into 2 parts. As this item is bulky, the delivery time may be extended. Thank you for your understanding.

The Meccano Kit is a set of supplies, an essential aid to facilitate the installation and to create rail and motor hangers. It contains: 2x Perforated Bars 730mm 2x Hanger Brackets 600mm 2x Hanger Brackets 450mm 2x Double Sliding Rail Supports 1x Pair of Sliding Fixtures (Left & Right) 6x Anchor Brackets 20x M8 Nuts + M8x20 Screws 20x Sheet Metal Screws 6.3x15

Suspension bracket and rail support, made of galvanized steel, to facilitate the installation of garage doors. Two available lengths: 450, 600 or 750 mm Two types of supports (+ 1 M8 bolt): for single rail or double rails Suitable for installing sectional or up-and-over garage doors.

Telescopic Spacing Crossbar 2x1.80 meter (per unit) This crossbar allows you to attach the back of your garage door rails to the ceiling and/or walls. It can extend up to a maximum of 3m. A model of 2x2.40m, which can extend up to 4.2 meters, is available here. As this item is bulky, the delivery time may be slightly extended. Thank you for your understanding.

Telescope Spacing Beam 2x2.40 meters (unit) This spacing beam allows you to secure the back of your garage door rails. It can extend up to a maximum of 4.2 meters. A model of 2x1.80m, which can extend up to 3 meters, is available here, with delivery by Colissimo.

Hanger brackets with perforations, made of steel, only without support. Length 450 mm, 600 mm or 750 mm Sold in packs of 20 Suitable for the installation of up-and-over and sectional garage doors. Also available individually here.

These reinforced anchor brackets (or mounting brackets) allow your up-and-over garage door or sectional garage door to be mounted on the wall. Dimension: 45 x 77 x H60 mm Material: galvanized steel Per set of 7 brackets (M8 screws and nuts supplied) Simply bolt these brackets to the studs (usually 3 brackets per side) and attach one to the top rail, then anchor them to the wall.

Metal bracket for wall shelf (pair) Solid brackets: made of 15/10 steel and solid shaped to support heavy loads. Useful to easily create a shelf (or a reinforcement to fix hangers, to stiffen an angle...) Available in 5 Sizes - from 200 to 500mm And 2 finishes - Raw galvanized steel - Galvanized steel, black lacquered

These parts allow the rear attachment of the rails to the spacer bar. Their design allows them to slide easily to adjust their position on the spreader bar. Dimension: 54x120mm In galvanized steel Sold in packs of 2 (1 left + 1 right) 6 screws + 6 M8 nuts supplied

These steel tubes are used to reduce the width of an opening or to create false spacers for the surface installation of a garage door. Post of 80 x 40mm at steel thickness 1,5mm Lenght : 2510mm Supplied with 2 floor fixing + 1 lintel fixing shoes and 4 pop rivets. Powder-coated

Rectangular galvanized steel tubes for various constructions. Several sections available:- 30x30 galvanized steel thickness 1.35 mm- 50x20 galvanized steel thickness 1 mm Material: Sendzimir galvanized steel E220+CR2S4 EN 10305-3 Length: 3000 mm Finish: raw galvanized steel, or powder coated in a color of your choice

These basic anchor brackets (or mounting brackets) allow your garage door to be mounted on the wall. Dimension: 95 x 38 x H38 mm Material: galvanized steel thickness 2mm Per set of 5 brackets (screws not supplied) Simply bolt these brackets to the studs and attach one to the top rail and then anchor them to the wall.