Frame Profiles and Panels for sectional garage door

Galvanized steel upper beam for sectional garage door Available in 2 sizes: - Door Width 2400mm (2380mm between posts / Total length of the piece 2500mm) - Door Width 3000mm (2980mm between posts / Total length of the piece 3100mm) Advice: to avoid the risk of errors, check your measurement between the posts (see sketch).

Sectional door jamb profile in unpainted steel (pair) (Caution bare profiles: delivered without equipment. Shoes & springs sold separately)   Available in 4 sizes : - Door height 2000 (Total room height 2090mm) - Door height 2125 (total room height 2215mm) - Door height 2500 (total room height 2590mm) - Door height 3000 (total room height 3090mm)

Suitable for sectional doors with a height up to 2125 mm. In steel thickness 2mm Overall length of rail: 2350mm Int radius : 250mm For roller use with 2" or Ø45mm Sold in pairs (left and right)

This steel profile has a use close to that of a partition rail. It is designed to be filled with 40 mm insulated panels like those used in the manufacture of our garage doors. Dimension: 40x40x20 mm Length: 1250mm Steel thickness: 1mm

Steel flag plate for sectional garage door operating a monorail system (pair) Allows the fixing of horizontal monorails to the door jambs. Supplied with M8 screws and nuts

These steel stops snap onto the rail and allow :  to hold a manual garage door in the open position. In this case, lift the door and the axis of the door will roller pass over the rounding of the room. This is sufficient to prevent it from falling back down. or limit the opening by adding a stop screw to stop the roller. Compatible with an up-and-over or sectional garage door

Old style central hinge for sectional garage door. Consists of two half-hinges connected by a clip pin. This hinge can be used laterally on a sectional door by combining it with the roller adjustable support.

Compatible only with SPADONE brand garage doors. The horizontal rails of the old SPADONE doors were assembled with the vertical uprights by 2 ABS curves, left and right. For after-sales service needs we still have some parts in stock. Sold per pair: right side (Ref PA6 6-30GF R) left side (Ref PA6.6-30GF L)

Double horizontal tracks for sectional garage door    Galvanized steel rails thickness 20/10  Flag plates included  Sold in pairs (1 model left + 1 model right) Suitable for Ø45mm casters    Available in 2 sizes: Door height ≤ 2250mm=> Rails L2642mm Door height > 2250mm and ≤ 3000mm=> Track L3392mm

This garage door riser allows you to add a fixed panel above your door in the continuity of your jambs.  The continuous aesthetic aspect of the frame is thus respected The fixed panel is combined with the seamless deck to create a plain deck. Quick assembly Insulated panel 40mm white wide groove

Pre -painted 6/10 ribbed steel sheet for replacing the apron of a non-insulated tilting garage door. Product discontinued and replaced by these 20mm rigid panels. We no longer produce sheet metal tilting doors, replaced by doors with these 20mm panels, which have the same external appearance with vertical grooves. They are easy to cut to any size. Available in white RAL9016 or Anthracite Grey RAL7016.

J-shaped rail for sectional garage doors or other uses.  Material: Galvanized Steel Thickness: 20/10 Sold individually Pre-drilling depending on the model Intended for Ø45mm castor  Available lengths longueurs :- 1200 mm (promo - random drilling)- 1640 mm- 1785 mm Rails also available in lengths up to 2500mm >

Rail for tilting or sectional garage door, J-shaped Material: Galvanized SteelThickness: 20/10Sold individuallyPre-drilling varies depending on the modelIntended for Ø45mm castor Available lengths:- 1900 mm (random drilling)- 2000 mm- 2500 mm (random drilling)- 3000 mm (random drilling) Rails also available in lengths of 1.2 to 1.8m with transport by Colissimo

4 garage door panels insulated 40 mm polyurethane, 2 sides steel Size 500 mm. Ideal to renovate your old garage door. - Type: grooved - Surface aspect: woodgrain  4 panels of L2420 x h500 mm 8 End caps white lacquered 1 black lip seal + rivets   Available in 2 colours white RAL 9016 / grey RAL 7016

4 Panels insulated 40 mm polyurethane, 2 sides steel Size 500 mm - Type: without groove - Surface appearance: polygonal 8 End caps white lacquered 1 black lip seal + rivets Ideal for renovating an old door   Available in 2 colours white RAL 9016 or Grey RAL 7016 - Door leaf 2400x2000 (4 panels of 2420x500)

Compatible with Spadone door or to fit on standard 2" rails, see diagram. This small steel curve connects with a straight track to form a monorail for your SPADONE sectional door. Thickness 15/10 galvanized steel R 250 mm ext Planned for rolling. Ø45mm  The pair  + 2 connections  + 4 M8 screws Flag plates / straight rails / rear brackets not supplied

These spring loaded steel stops are fixed to the rail and stop a manual garage door in the max. open position. Length 235mm Resistant rubber buffer 8 M8 pan bolts supplied Sold in pairs In option: pair of support + 4M8 Compatible with overhead or sectional garage doors.

5 Panels insulated 40 mm polyurethane, 2 sides steel Size 500 mm - Type: grooved - Surface aspect: woodgrain  10 End caps white lacquered 1 jt black lip flange + rivets 1 U of 40mm cladding (if trimming the top p)   2 colours white / grey 7016: - Door leaf 2400x2500 (5 panels of 2420x500)

5 Panels insulated 40 mm polyurethane, 2 sides steel Size 500 mm for sectionnal garage door. - Type: without groove - Surface aspect: polygrain  5 panels of 2420x500  10 End caps white lacquered 1 jt black lip flange + rivets   2 colours white RAL9016 or grey RAL7016

These end caps fit onto the ends of straight rails to convert them into a curved top guide rail for double track sectional doors. Made of aluminium The pair + 4 bolts M8x20 Compatible with standard rails on the market (2 inches) Straight rails not supplied

These galvanized steel end caps attach to the ends of straight rails to transform them into a top curve for guiding the casters of your sectional door. Length 500mm The pair + 4 bolts M8x20 Nesting, drilling and bolting Compatible with standard rails on the market (2 inches or 25x53mm) Rails not supplied

These white pre-painted steel end caps fit onto the end of the sandwich panels of a 40mm thick insulated sectional garage door. They allow both the holding together of the two sides of the panel on the insulating foam and also reinforce the attachment of accessories (hinge, roller support) screwed onto the inner face of the panel. In white pre-painted steel, thickness 6/10 Sold in pairs

4 Garage door panels, 40 mm insulated, 2 steel faces, Height 500mm. - Type: wide groove- Surface appearance: smooth - Color: golden oak The interior face of the panels is always white. 8 White lacquered end caps 1 black lip seal + rivets Ideal for renovating an old door   - Curtain for door 2400x2000 (4 panels of 2420x500)Contact us for other dimensions, available on request.

2-inch straight guide rail in galvanized steel (designed to guide rollers with a 45mm diameter) Presence or absence of punching in the rails, with rectangular and/or oblong shapes in variable positions depending on arrivals Thickness: 2mm Length: 1200mm Per unit

This galvanized steel profile allows the 90° return of 2 straight rails, particularly in the case of retracting the curtain for a sectional garage door with lateral movement. Radius: 400mm, 550 x 550 Compatible with standard market rails (2 inches or 25x53mm) Screws not included