Operator Accessories for sectional garage door

Very useful for unlocking your engine from the outside in case of a power outage! Comes with 2 keys Originally designed for insulated panels 20 to 40mm If insulated 40mm or 20mm => use the standard kit without support If insulated 60mm or single metal (non-insulated) => use the ISO60 support (provided with 8 rivets)

Photocell Barrier for Motor One with adjustable support. Ensures the safe descent of your garage door. An obstacle in front of the cells will stop its closure.  A pair of cells (one emitting cell + one receiving cell)  Two adjustable supports (allowing for easier and more precise alignment and adjustment, even with uneven and non-parallel walls)

Remote control for Chamberlain Liftmaster ML500 motor (single unit) This transmitter replaces remote controls with references 4335 and 84335. This remote replaces the original model. It is not a universal or copier remote; it programs and works directly with your ML500 motor or others (complete list below). Easy programming with the included manual and available in the "Documentation" tab

Versions 1, 2, 3 and 4 are no longer for sale, replaced by v5 which is compatible with the previous ones. 433mhz Rolling Code (enhanced security) 4 channels = ability to control 4 doors or 4 ONE automations Compatible with ONE D and ONE X motors Attention:Compatible only with our ONE motorsNot compatible with FUTURCOM motors 10€ offered When purchasing at least two remote controls It's automatic ;)

Open your door with a secret code (3 to 8 digits). Convenient for opening your door without a remote control Easy to install, just screw it in Long transmission range 433mhz Rolling Code transmission (enhanced security) 2 channels = ability to control 2 doors/ONE automations 2 3V CR2032 batteries (included) Note, specific coding for ONE motors of our own brand.

Backup Battery for Motor ONE (the unit) Convenient, in case of a power outage, your ONE motor will still operate. Lithium Battery Power: 24V 1.5 Ah Dimensions: approximately 160x100x50 mm Attaches above the motor head (or if that is not possible, it can be fixed to the ceiling with one anchor)

To be installed on the automation to be controlled Makes your motor compatible with our ONE transmitters/keypad Frequency 433mhz 2 ONE V5 transmitters (optional) Easy to implement     - 2 wires => 12 /24V     - 2 wires => dry contact on PUSH BUTTON / START input Mini size: 65mm x 45mm x 25mm

The tie-down plate attaches to the top of the sectional garage door panel and receives the motor bracket. Its shape allows the consolidation of the panel profiles so that the panel does not risk to deteriorate (tearing). This plate is pre-drilled to receive the engine ONE or ML510 Chamberlain tie-downs (sold separately). To be fixed with 4 rivets (supplied)

Chamberlain ML500 engine trolley external part Ref : 041C7108 (replaces part numbers 210C0040 / 041C5620 / 04666) It is compatible with the following other CHAMBERLAIN* engines: HE60 / HE60AS / HE60PY / PSGTA60 / GPD60 / GPD65 *Also compatible with Wayne Dalton Push & Pull engines installed on Wayne Dalton doors.

This set contains : A drive chain Chamberlain / Motorlift ML500       The chain part is composed of a cable (about 2.5m long) and an 2.5m chain approximately. An internal trolley (Ref 01A5644 / 210C0050)

Motor trolley on the drive sideONE Compatible with all range ONE motors (600,1000,1200... with chain or belt rail) Also compatible with some Futurcom engines Delivered without accessories, without chainSupplied with 4 screws  Caution, the second part of the trolley (disengagement handle) is not supplied.

This steel link arm connects the top panel of your sectional garage door with the motor carriage. Fastening with the pins (not supplied) on the carriage and the motor lashings. Material: steel, thickness 5mm

The rail bracket is attached to the rail profile of the entire motor ONErange. It is then used to suspend the rail from the ceiling using hanger brackets (not supplied). This support leaves free passage for the trolley, it does not hinder the trolley's travel.

Motor trolley external ONE side with release handle. Compatible with all motors in the range ONE (600,1000,1200... chain or belt) Also compatible with some Futurcom engines. Delivered alone (without chain)   Attention, the 2nd part of the internal carriage "drive side" is sold separately.

Chamberlain Liftmaster ML500 Internal Trolley Ref : 001A5644/210C0050 Delivered without the chain (version with chain available here) Also compatible with Chamberlain ML500 / HE60 / HE60AS / HE60PY / PSGTA60 / GPD60 / GPD65 and Push & Pull motors on some Wayne Dalton doors

This aluminium toothed pinion fits directly on the square output of the engines ONE and makes it compatible with the rails available since 2013 (whose drive pulley is also splined). Delivered alone without any other accessories

Chamberlain ML500 and Wayne Dalton Push&Pull motor limit switches Also compatible with HE60 / HE60AS / HE60PY / PSGTA60 / GPD60 engines Ref.: 041C0521-1 In definitive rupture Chamberlain has discontinued this model. We recommend replacing your motor with a ONE 600  which has an equivalent power (600N). It comes with a motor head, 2 remote controls and a rail with chain (original rail incompatible).

The set of 2 PVC shells protecting your engine ONE allows you to restore your engine. 1 engine hull (equipped with its push button to be reconnected to the engine electronic board) 1 white translucent cover on the lighting side Delivered alone, without screws or electronic board keyboard/screen Attention: two different models exist, to choose from the drop-down list.

Set of 2 motor-door linkage brackets: - 1 straight stock (for overhead door or as an extension to the angled stock) - 1 angled handle (for sectional door) Possibility of assembling them to obtain a longer set thanks to 2 M6 nuts included Chamberlain brand, adaptable to other brands' engines. Dimension approx. 250x25x 5mm thick in black lacquered steel

Electronic board for engine ONE Compatible with all motors ONE (600N,1000N,1200N) Useful to replace a faulty card or to take advantage of the latest functions (to be discovered in the detailed description).

This electronic board is composed of an LCD screen and a 4-button keyboard. It is mounted from the inside of the engine hood. Attention: 2 different models to choose from the drop-down list. 1st model for motor with D-type hood (red, blue or beige) + key sticker 2nd model for engine with hood type H (black)

3V Cr 2032 button cell batteries   Used in particular in our digicodes ONE and v3 and v5 transmitters ONE .   Sold in packs of 2

Garage door motor bracket to be placed on the spacer crossbar at the back of the door tracks (crossbar not supplied) This support allows the rear fixing of your motor rail, directly on your spreader bar. Which is very useful if your ceiling is high and out of reach of angles. Designed for a 55 to 81mm wide motor rail .  Contents of the kit: 1 black lacquered support  1 cavalier rail ONE 4 M8 bolts

3V CR2016 button cell batteries Used in particular in our ONE V4 remote controls and in Chamberlain ML500 4435 and 84335 remote controls. Sold in packs of 2 To replace the CR2016 3V batteries on ONE V4 remote control, remove the small screws on the back of the transmitter and remove the casing (observe the direction in which the old batteries are inserted when fitting the new ones).

This metal piece is attached to the top panel of your sectional door. It allows you to attach the angled stock of your engine to it. This part can also be adapted to other brands of engines, the principle being generally the same. This kit includes : 1 engine stowage ONE 1 axis + 1 pin 6 sheet metal screws 6.3x16

Universal reduced-band 433.92 MHz antenna 2.1dBi gain, 50Ω impedance, 433-435 MHz band. LC anti interference for frequency limit 433-435MHz band Dimensions: H=310x30x150mm Stainless steel bracket, screws and nuts  Protected by RF connector, with hole for water drainage Assembled with approx. 6m of RG58 coaxial cable

This sprocket wheel fits into the square output of the motor ONE and allows the chain or belt to be driven. Available in several versions, choose well in the drop-down list. Chain version : Nylon + metal Belt version : Nylon + metal

This kit allows the installation of a limit switch sensor on your gate to prevent the door from opening if it has been left open. Kit Contents : 1 limit switch (with its swivel lever) 1 bracket (to fix the sensor to the door frame) 5m double electric cable 1m coiled cable 1 junction box (+ 1 terminal block 2x2) 1 bag of screws

Driving link for an engine ONEThis link, linked to the chain or belt, drives the trolley to operate the door.Available in 2 models: chain or beltDelivered alone

This remote control can control up to 2 BFT automations in 433mhz Frequency: 433.92 MHz. Number of channels: 2 Recording by signal copy (via other functional transmitter) or direct (via receiver) Power supply: 23A 12V (included) Replaces transmitters  - BFT TRC1 / BFT TRC2  - BFT MiTTO 2M / BFT MITTO 4M  - BFT MITTO 2A See list of compatible receiver models at the bottom of the description.

For motor Motor ONE Sold with 1 Fuse T2,5A 5x20mm

For motor Motor ONE T2.5A 5x20mm fuse sold alone Unity

Transmitter for Push & Pull motor (the unit) Not compatible with Push&Pull B opener Very easy programming, instructions in appendix. This is not a copying remote control, our model works alone and is just as secure as the original one. 10€ free For the purchase of two or more remote controls It's automatic ;)

This string with its red PVC ball allows you to disengage the trolley from your motor more easily in order to operate your garage door in manual mode.

Transmitter for Wayne Dalton E4F Push & Pull B engine (the unit) Very easy programming, instructions in appendix. Original manufacturer's model. Model BERNAL B 260.254-N with 4 buttons and operating frequency of 433.92 MHz. Warning: this product is no longer available, it is now replaced by our radio ONE receiver and ONE remote : Learn more

This tensioner placed at the end of the motor ONE rail (lintel side) allows the adjustment of the tension of the chain (or belt) of the motor rail. Compatible only with our ONE garae door opener (chain or belt model)

Contact: 1NO + 1NC Voltage: 250V AC 5A, 115V DC 0.4A Pebble 1.7 x 0.6 cm Hole Ø 0.5 cm Size: 9.3 x 2.8 x 2.5cm with roller mounted on adjustable lever (~ 10cm) This type of sensor can be used for several purposes: - limit switch for doors with old motor; - triggering secondary lighting...

This quick-release clip will allow you to repair your motor chain easily. The installation of the clip is very easy: with a simple pair of pliers you clip the staple to close the clip. For chain with 12.7mm pitch (very common model on garage door motors, bicycles...) Sold per unit

Original motor transformer ONE Delivered with its retaining screw 220V-24V 3.3A

Rail connection for a motor ONE Compatible with the rail of ONE 600, 1000 or 1200 belt or chain motors. Delivered alone (without other accessories) In profiled steel

This type of spiral wire is used on our garage doors to connect the wicket door safety sensors. Length 0.42m at rest - 1.5m approx. extended With 2 conductors Ø22.5mm ext , Ø5mm duct-Ø

This extractor, very easy to use, will allow you to repair your engine chain easily. It allows the removal of the small pins connecting the links of the chain (without hammer, pliers or needle). If you don't completely remove the link pin, you can even reinsert it to re-form your chain, so you don't need to add a quick link!  Sold per unit

Open your door with a 4-digit secret code Convenient to open without remote control Easy to install, just screw it in Rolling Code (enhanced security) 1 x 9V battery (supplied) Please note, coding only compatible with the following Chamberlain motors: ML510EV, ML550EV, ML700EV,ML800EV, ML1000EV, ML1000EV-S, ML1000EV-F

TX4RUNI Universal Remote Control for Chamberlain Motor.This transmitter can be programmed on all Chamberlain garage door motors. Dimensions : 70 x 26 x 11 mm 433mhz Rolling Code emission (enhanced security) 4 channels = possibility of ordering 4 CHAMBERLAIN* equipped doors  1 CR2032 3V - included

Open your door / check its status from a smartphone or any internet device Convenient to open without remote control Easy pairing, just connect it to your router/box and pair it with the motor  Application MyQ Android & iOS Use of photoelectric cells is mandatory for remote opening/closing functions (provided)

Check the status of your door from your living room or bedroom A flashing red light indicates if the door has been left open, a control button allows it to be closed (only close), and a buzzer (which can be deactivated) confirms correct closing with a fixed green light. Kit a photoelectric cell kit (not supplied!) ( required to be able to close)

Barrage Photoelectric Cells for CHAMBERLAIN Motor Allows you to secure the descent of your garage door. A barrier in front of the cells will then stop it from closing.  A pair of cells (one transmitting cell + one receiving cell) Very easy to install (see accessory connection diagram)

Yellow LED flashing lamp Recommended for garage doors and courtyard gates opening directly onto a street: warns when closing or opening. 2 possible voltages according to installation : Continuous 12V to 30V Alternative 90V to 260V 2 different ignitions : Fixed* / Flashing (* provided that the output of your motor is not already flashing by default )

3V Cr 2430 button cell batteries   Especially for use in roller shutter transmitters   Sold in packs of 2

Remote control for Chamberlain Liftmaster ML510EV BASIC,  ML700EV and ML1000EV motor replacing the original TX2REV model not available from Chamberlain. Dimensions: 60x35x11 mm 3 channels = possibility to control 3 doors equipped with Chamberlain ML510EV BASIC with the 3 buttons of the remote control 1 CR2032 3V battery included This  is not  a copycat remote. It pairs with the motor and is just as secure as the original transmitter.

This receiver makes your garage door motor compatible with connected systems. You can open your door, close it and check its status from your smartphone with voice command, on the Meross (Android / iOS) or Apple Home app. Easy to install, it is connected to the motor on the terminals for the push button, a wired sensor detects the position of the door and it is supplied by a power outlet.

This ABS bracket fits onto the rail of the ONE motor (motor side) and helps hold the sprocket driving the chain. It is secured with 2 provided screws. Note: this sprocket bracket is only compatible with our ONE motors (chain or belt) and with our ONE sprockets.

Very useful for unlocking your engine from the outside in case of a power outage. Delivered with 2 keys Designed for insulated doors up to 50mm thick. Model LiftMaster 1702EV

Replacement gear motor for ONE motor power 600N (ONE motor with red cover) or 1000-1200N (ONE motor with blue or gray cover) original part equipped with its encoder card at the end of the shaft equipped with shaft output with toothed pinion (removable if needed to retrieve the 8.5x8.5 square output) Only suitable for our ONE motors.

Replacement Gear Motor for Chamberlain ML510EV Garage Door Motor Ref: 041A4005 power 500N original part equipped with its encoder board at the end of the shaft equipped with shaft output with toothed pinion Only suitable for motors: CHAMBERLAIN ML 510 EV and HE500AN LIFTMASTER LM50EV and LM55EVS

Chamberlain ML510 EV Engine Trolley Delivered with its integrated steel connecting arm This trolley has a small string to disengage it and switch the garage door to manual mode Ref: 041A4014 It is also compatible with the motor systems: ML550EV, ML510-BASIC, ML700-02, ML750-02, ML850-02HE500AN

This small PVC rider is mounted on a chain link and serves as a marker for the electronics of your ML510EV motor Designed for Chamberlain ML510EV motor Ref: 041A4016   It is also compatible with the LIFTMASTER LM50K/EV Motorization

This gear mounted on its support allows the engine chain to be driven The support is easy to change, it is just slotted at the end of the rail and screwed Designed for Chamberlain ML510EV motor Ref: 041A4020 It is also compatible with LIFTMASTER LM50K/EV garage door opener

Drive link for Chamberlain ML510EV motor This link, connected to the chain, drives the carriage to operate the garage door. Delivered alone Ref: 041A4021   It is also compatible with LIFTMASTER CHAMBERLAIN motors ML550EV / ML700-02, ML750-02, ML850-02 / ML510-BASIC and HE500AN

Original transformer for the motor of your CHAMBERLAIN ML510EV garage door Delivered with its 2 connector plugs 230V-24V 55VA Ref: 041A4024 It is also compatible with the ML550EV motorization as well as the LIFTMASTER LM50EV, LM55EVS, LM60EVS motorizations

Motherboard for Chamberlain ML510EV motor Delivered with its 433MHz / 868MHz radio receiver already connected to the board Reference: 041A4001EV-2 This board is only compatible with CHAMBERLAIN ML510EV and MotorLift ML550EV motors

Inner trolley for motor Lifmaster Chamberlain ML700EV-COMFORT and ML1000EV-PREMIUM This link, connected to the belt, drives the trolley to operate the garage door. Delivered alone. Reference: 041A4021R

Carriage for Lifrmaster Chamberlain ML700EV-COMFORT and ML1000EV-PREMIUM motor Delivered with its integrated steel connecting arm This carriage has a string and a green button to disengage and switch the garage door to manual mode in case of motor failure or power outage. Reference: 041A4037 This carriage is also compatible with the motors: ML800EV, ML1000EV-S, ML1000EV-F

Power module (with low power standby 0.8 watt) Reference: 041A4023 Compatible with motors: - Chamberlain ML510EV- MotorLift ML550EV- Chamberlain ML700EV- Chamberlain ML1000EV- MotorLift ML1000EV-S / ML1000EV-F

This blocker ensures the immobilization of a garage door gate in the open position against a wall or other Made of injected PVC, available in white or black Screws not provided, adapt according to the support Very easy to install: - Attach part A to the gate (preferably in a reinforcement) - Fix part B on the facing wall (or other) - Part A fits into part B for temporary holding of the gate in the open position

Futurol no longer distributes this reference, so this is our only solution for replacing their remote control model. Pack: 1 ONE receiver + 2 ONE V5 remotes 1 receiver - 433mhz - To be connected to your Futurcom motor (version with black cover & central black button) - Makes your motor compatible with our ONE transmitter / ONE code panel 2 ONE V5 remotes Easy to implement     - 2 wires => 12 /24V     - 2 wires => dry contact

This wireless kit ensures the security of an automated garage door equipped with a pedestrian gate by blocking the motor if the gate is open. Wireless radio kit composed of: - 1 magnet to place on the gate - 1 wireless transmitter to place on the doorwith 1 CR2450N lithium battery included (Lifespan 1 to 2 years depending on usage) - 1 receiver to connect to the motor at the pedestrian gate terminal NF contactpower supply 12/36Vac-dc 0.6W via the motor

This toothed belt allows the movement of the motor carriage on the following motors: SOMFY DEXXO PRO 800 and 1000 SOMFY DEXXO SMART 800 and 1000 SOMFY DEXXO OPTIMO 800 and 1000 SOMFY DEXXO COMPACT 600 and 1000 It can be easily cut with wire cutters to adjust to the desired length. Length: 6 meters, width 8mm Sold alone, without accessories