Seals for up-and-over garage door

Seals for up-and-over garage doors

The seals of a tilting garage door are components subject to wear, so it is normal to need to replace them after several years of exposure to seasonal temperature variations. Seals in good condition are essential to ensure proper insulation of your tilting door. However, finding a compatible model can sometimes be difficult. That is why we offer you the opportunity to order a sample for €1 on most of our models below, to easily check if the proposed model fits your door.

To effectively maintain the seals of your tilting garage door, we recommend applying silicone grease spray on the flexible parts before the cold season arrives. This will help limit the aging of the seals and prevent resistance during the opening and closing of your door.

Foam gasket 9 x 5 adhesive 1 face (per m) Foam gasket 9 x 5 adhesive on one side
One-sided adhesive foam gasket, 3 widths to choose from. Use similar to the "compriband" type seal Thickness: 5 mm Width: 9mm, 20mm or 50mm Length: Product sold by meter (Quantity 5 = 5 meters) To be cut at your convenience with scissors or a cutter.
Price:€1.80
Double-lip Z-Y seal cover for up-and-over doors Cover Double Lip Z-Y Soft Seal
Double-lipped flexible seal cover for up-and-over garage door. Reversible: can be fixed on the left and right uprights (by screw or rivet) or on the left or right apron. This seal can also be used as a bottom seal for sectional garage doors (refer to the diagram in the illustration). To be cut at your convenience with a hacksaw.
Price:€24.90
Mudflap Seal 25 mm Up-and-over Door Mudflap Seal 25 mm Up-and-over Door
Joint Mudflap 25 mm up-and-over garage door. Fits in the groove of the door frame profile. Several sizes available, to be cut at your convenience with a hacksaw.
Price:€29.70
Lateral friction ring 850mm (pair) Lateral rubbing strip for an overhead door
Lateral rubbing strip for an up-and-over garage door. Length 850 mm (pair) In black rigid PVC Fits in the grooves at the top of the jambs and guides the door leaf during opening and ensures that the lateral clearance of 7 mm between the door leaf and the frame uprights is maintained. Preheat with a hair dryer or heat gun to facilitate placement.
Price:€19.50
Bottom seal cover Up-and-over door EURONORM Bottom seal cover Up-and-over door EURONORM
Bottom seal cover for EURONORM up-and-over door. It is screwed to the bottom of the door frame. Now in metal (originally in grey PVC)Length approx. 52cm to be cut if necessaryThe pair4 self-drilling screws included
Price:€16.80
Aluminium brush joint - Length 150 cm Garage brush seal
Door bottom brush seal Anodized aluminum stand Black PVC brush Delivered in lengths of 1.5m "h" or "f" profiles 14mm or 24mm brush Easy to cut with a hacksaw (crush the brush profile at the ends in case of cutting).
Price:€33.90
Sill seal WATER STOP Sill seal WATER STOP
This very flexible threshold seal provides a double seal when closing at the bottom of your garage door, in addition to the seal fitted under your lower panel. Weatherproof, rainproof, stops water, drafts, leaves/dust to keep your garage clean and dry Designed to allow the silent passage of a vehicle driving over it In PRODENE 503 70 SH BLACK We recommend PU40+ glue (sold separately)
Price:€37.90
Mud flap seal Y Mud flap seal Y
Seal with soft lip for overhead or sectional doors.This joint is fixed by rivets or small screws (not supplied). It can be overlapped at your convenience with a hacksaw or pruning shears. Length : 1,10m
Price:€13.20
Lip seal for an overhead gate Lip seal for an overhead gate
Seal composed of a rigid PVC part and a flexible lip. The rigid part is clipped onto a sheet metal thickness or profile edge. This joint is easily cut with a hacksaw. Up-and-over door: can be clipped on to the vertical/horizontal profiles of your frame and allows a sealing on all 4 sides of the door. Sectional garage door: can be used as side seals.
Price:€12.00
Joint d'angle (le m) Joint d'angle (le m)
This flexible joint makes it possible to assemble 2 sheets at an angle on their edgesIt is recommended to use this seal on sheets of 10/10, 15/10 or 20/10 maximumFor a better hold of the joint it will be necessary to glue it.Its great flexibility allows for curvatures. Sold by the meterColor black
Price:€10.00
Loading...