Frame Profiles and Panels for up-and-over garage door

Up-and-over garage door top rail in unpainted steel (the unit) 3 sizes available:- Door Width 2400 (Total length of the part 2505mm)- Door Width 2500 (Total Part Length 2605mm)- Door Width 3000 (Total length of the part 3105mm) This profile is delivered in 2 parts.

Profile for the sides of a tilting garage door, with a section of 40x70mm in galvanized steel thickness 1.5mm delivered in pairs delivered bare, without accessories (without springs, swing arm,  joint cover... 3 lengths available: - Door H2000 (total room height 2070mm) - Door H2125 (total room height 2195mm) - Door H2400 (total room height 2470mm) Possibility of cutting from the bottom for custom dimensions

This steel profile has a use close to that of a partition rail. It is designed to be filled with 40 mm insulated panels like those used in the manufacture of our garage doors. Dimension: 40x40x20 mm Length: 1250mm Steel thickness: 1mm

These steel stops snap onto the rail and allow :  to hold a manual garage door in the open position. In this case, lift the door and the axis of the door will roller pass over the rounding of the room. This is sufficient to prevent it from falling back down. or limit the opening by adding a stop screw to stop the roller. Compatible with an up-and-over or sectional garage door

Piano hinge used for the articulation of the service gate on a tilting garage door or a service door. In anodized aluminum 3 Lengths available:- approximately 350mm- 2000mm- 2500mm Supplied with 10 rivets We recommend drilling with a 4.2 mm drill bit to install this hinge with the rivets provided.

Pre -painted 6/10 ribbed steel sheet for replacing the apron of a non-insulated tilting garage door. Product discontinued and replaced by these 20mm rigid panels. We no longer produce sheet metal tilting doors, replaced by doors with these 20mm panels, which have the same external appearance with vertical grooves. They are easy to cut to any size. Available in white RAL9016 or Anthracite Grey RAL7016.

Rail for tilting or sectional garage door, J-shaped Material: Galvanized SteelThickness: 20/10Sold individuallyPre-drilling varies depending on the modelIntended for Ø45mm castor Available lengths:- 1900 mm (random drilling)- 2000 mm- 2500 mm (random drilling)- 3000 mm (random drilling) Rails also available in lengths of 1.2 to 1.8m with transport by Colissimo

These spring loaded steel stops are fixed to the rail and stop a manual garage door in the max. open position. Length 235mm Resistant rubber buffer 8 M8 pan bolts supplied Sold in pairs In option: pair of support + 4M8 Compatible with overhead or sectional garage doors.

For up-and-over renovations with or without wicket door Replacement of wooden or PVC slats 20mm wide 610mm insulated px, vertical groove rails Steel profiles for counterbore (10x20x10) Rivets included for concealed fixing from the outside Sets of 4 or 5 panels 610mm : 4 panels of 2125x610 for door of L2400xh2125 5 panels of 2125x610 for door of L3000xh2125 Color: Grey RAL 7016 White RAL 9016

2-inch straight guide rail in galvanized steel (designed to guide rollers with a 45mm diameter) Presence or absence of punching in the rails, with rectangular and/or oblong shapes in variable positions depending on arrivals Thickness: 2mm Length: 1200mm Per unit