Spare Parts for Chamberlain Motors

Remote control for Chamberlain Liftmaster ML500 motor (single unit) This transmitter replaces remote controls with references 4335 and 84335. This remote replaces the original model. It is not a universal or copier remote; it programs and works directly with your ML500 motor or others (complete list below). Easy programming with the included manual and available in the "Documentation" tab

Chamberlain ML500 engine trolley external part Ref : 041C7108 (replaces part numbers 210C0040 / 041C5620 / 04666) It is compatible with the following other CHAMBERLAIN* engines: HE60 / HE60AS / HE60PY / PSGTA60 / GPD60 / GPD65 *Also compatible with Wayne Dalton Push & Pull engines installed on Wayne Dalton doors.

This set contains : A drive chain Chamberlain / Motorlift ML500       The chain part is composed of a cable (about 2.5m long) and an 2.5m chain approximately. An internal trolley (Ref 01A5644 / 210C0050)

Chamberlain Liftmaster ML500 Internal Trolley Ref : 001A5644/210C0050 Delivered without the chain (version with chain available here) Also compatible with Chamberlain ML500 / HE60 / HE60AS / HE60PY / PSGTA60 / GPD60 / GPD65 and Push & Pull motors on some Wayne Dalton doors

The electronic board of these motors is unfortunately unavailable, as the manufacturer has stopped production for several years. As a replacement for your engine, we can offer you our ONE600 engine which has an equivalent power. This motor is delivered with a motor head, a chain rail and 2 transmitters. Installation and programming are very simple. Product discountined by Chamberlain

Chamberlain ML500 and Wayne Dalton Push&Pull motor limit switches Also compatible with HE60 / HE60AS / HE60PY / PSGTA60 / GPD60 engines Ref.: 041C0521-1 In definitive rupture Chamberlain has discontinued this model. We recommend replacing your motor with a ONE 600  which has an equivalent power (600N). It comes with a motor head, 2 remote controls and a rail with chain (original rail incompatible).

Chamberlain Motor Lift 500 - tractive force 60 kg Definitively broken The Chamberlain brand has stopped manufacturing this model. We advise you to replace it with a 600 motorization ONE kit which has an equivalent power (600N). This kit is delivered with a motor head, two remote controls and a rail (the rail of the ML500 is incomprehensible). Engine ONE 600 (Complete kit) >

Set of 2 motor-door linkage brackets: - 1 straight stock (for overhead door or as an extension to the angled stock) - 1 angled handle (for sectional door) Possibility of assembling them to obtain a longer set thanks to 2 M6 nuts included Chamberlain brand, adaptable to other brands' engines. Dimension approx. 250x25x 5mm thick in black lacquered steel

Push and Pull motor - tractive force 60 kg - Ref HE60-4WD Definitively out of order WayneDalton stopped making this model. We advise you to replace it with a 600 motorization ONE kit which has an equivalent power (600N). The delivered kit includes a motor head, 2 remote controls and a rail with chain (the Push&Pull rail is unbreakable). Engine ONE 600 (Complete kit) >

Contact: 1NO + 1NC Voltage: 250V AC 5A, 115V DC 0.4A Pebble 1.7 x 0.6 cm Hole Ø 0.5 cm Size: 9.3 x 2.8 x 2.5cm with roller mounted on adjustable lever (~ 10cm) This type of sensor can be used for several purposes: - limit switch for doors with old motor; - triggering secondary lighting...

This type of spiral wire is used on our garage doors to connect the wicket door safety sensors. Length 0.42m at rest - 1.5m approx. extended With 2 conductors Ø22.5mm ext , Ø5mm duct-Ø

Open your door with a 4-digit secret code Convenient to open without remote control Easy to install, just screw it in Rolling Code (enhanced security) 1 x 9V battery (supplied) Please note, coding only compatible with the following Chamberlain motors: ML510EV, ML550EV, ML700EV,ML800EV, ML1000EV, ML1000EV-S, ML1000EV-F

TX4RUNI Universal Remote Control for Chamberlain Motor.This transmitter can be programmed on all Chamberlain garage door motors. Dimensions : 70 x 26 x 11 mm 433mhz Rolling Code emission (enhanced security) 4 channels = possibility of ordering 4 CHAMBERLAIN* equipped doors  1 CR2032 3V - included

Open your door / check its status from a smartphone or any internet device Convenient to open without remote control Easy pairing, just connect it to your router/box and pair it with the motor  Application MyQ Android & iOS Use of photoelectric cells is mandatory for remote opening/closing functions (provided)

Check the status of your door from your living room or bedroom A flashing red light indicates if the door has been left open, a control button allows it to be closed (only close), and a buzzer (which can be deactivated) confirms correct closing with a fixed green light. Kit a photoelectric cell kit (not supplied!) ( required to be able to close)

Barrage Photoelectric Cells for CHAMBERLAIN Motor Allows you to secure the descent of your garage door. A barrier in front of the cells will then stop it from closing.  A pair of cells (one transmitting cell + one receiving cell) Very easy to install (see accessory connection diagram)

Remote control for Chamberlain Liftmaster ML510EV BASIC,  ML700EV and ML1000EV motor replacing the original TX2REV model not available from Chamberlain. Dimensions: 60x35x11 mm 3 channels = possibility to control 3 doors equipped with Chamberlain ML510EV BASIC with the 3 buttons of the remote control 1 CR2032 3V battery included This  is not  a copycat remote. It pairs with the motor and is just as secure as the original transmitter.

This receiver makes your garage door motor compatible with connected systems. You can open your door, close it and check its status from your smartphone with voice command, on the Meross (Android / iOS) or Apple Home app. Easy to install, it is connected to the motor on the terminals for the push button, a wired sensor detects the position of the door and it is supplied by a power outlet.

Very useful for unlocking your engine from the outside in case of a power outage. Delivered with 2 keys Designed for insulated doors up to 50mm thick. Model LiftMaster 1702EV

Replacement Gear Motor for Chamberlain ML510EV Garage Door Motor Ref: 041A4005 power 500N original part equipped with its encoder board at the end of the shaft equipped with shaft output with toothed pinion Only suitable for motors: CHAMBERLAIN ML 510 EV and HE500AN LIFTMASTER LM50EV and LM55EVS

Chamberlain ML510 EV Engine Trolley Delivered with its integrated steel connecting arm This trolley has a small string to disengage it and switch the garage door to manual mode Ref: 041A4014 It is also compatible with the motor systems: ML550EV, ML510-BASIC, ML700-02, ML750-02, ML850-02HE500AN

This small PVC rider is mounted on a chain link and serves as a marker for the electronics of your ML510EV motor Designed for Chamberlain ML510EV motor Ref: 041A4016   It is also compatible with the LIFTMASTER LM50K/EV Motorization

This gear mounted on its support allows the engine chain to be driven The support is easy to change, it is just slotted at the end of the rail and screwed Designed for Chamberlain ML510EV motor Ref: 041A4020 It is also compatible with LIFTMASTER LM50K/EV garage door opener

Drive link for Chamberlain ML510EV motor This link, connected to the chain, drives the carriage to operate the garage door. Delivered alone Ref: 041A4021   It is also compatible with LIFTMASTER CHAMBERLAIN motors ML550EV / ML700-02, ML750-02, ML850-02 / ML510-BASIC and HE500AN

Original transformer for the motor of your CHAMBERLAIN ML510EV garage door Delivered with its 2 connector plugs 230V-24V 55VA Ref: 041A4024 It is also compatible with the ML550EV motorization as well as the LIFTMASTER LM50EV, LM55EVS, LM60EVS motorizations

Motherboard for Chamberlain ML510EV motor Delivered with its 433MHz / 868MHz radio receiver already connected to the board Reference: 041A4001EV-2 This board is only compatible with CHAMBERLAIN ML510EV and MotorLift ML550EV motors

Inner trolley for motor Lifmaster Chamberlain ML700EV-COMFORT and ML1000EV-PREMIUM This link, connected to the belt, drives the trolley to operate the garage door. Delivered alone. Reference: 041A4021R

Carriage for Lifrmaster Chamberlain ML700EV-COMFORT and ML1000EV-PREMIUM motor Delivered with its integrated steel connecting arm This carriage has a string and a green button to disengage and switch the garage door to manual mode in case of motor failure or power outage. Reference: 041A4037 This carriage is also compatible with the motors: ML800EV, ML1000EV-S, ML1000EV-F

Power module (with low power standby 0.8 watt) Reference: 041A4023 Compatible with motors: - Chamberlain ML510EV- MotorLift ML550EV- Chamberlain ML700EV- Chamberlain ML1000EV- MotorLift ML1000EV-S / ML1000EV-F