Spare parts for Leroy Merlin / AGS

Steel cable Ø3mm with loop 7x19 mm + 2 hammer-crimped plombs Not suitable for replacing Ø2mm cables (e.g., Wayne Dalton...) 3m : for a vertical spring door H 2000 (maximum H2125 mm) 5m20: garage door with vertical springs H 3000 (compatible with old garage doors with horizontal springs Height 2125)

Tandem roller for sectional garage door (unit) Roller axle diameter 11mm Rod length: 95mm Rollers diameter 45mm Ball bearing Sold without hinge support (available here)

Hinge lateral support roller for sectional garage door (unit) White lacquered side hinge to be used at the joints between the panels of a sectional garage door, designed to support rollers with an 11mm diameter axle. To be used with tandem rollers or side sectional door rollers.

Suspension bracket and rail support, made of galvanized steel, to facilitate the installation of garage doors. Two available lengths: 450, 600 or 750 mm Two types of supports (+ 1 M8 bolt): for single rail or double rails Suitable for installing sectional or up-and-over garage doors.

ONE X motorization for sectional and up-and-over garage doors up to 12m², with integrated LED lighting, obstacle detection, and optional smartphone connectivity. Automation delivered complete with: 1 ONE motor head with 140cm power cable 2 ONE transmitters 1 chain rail 1 ceiling mounting kit 1 connecting arm for sectional door and 1 connecting arm for up-and-over door

EPDM rubber seal for garage door bottom. This very flexible gasket provides a better seal than the simple bib gasket. It can be cut with a cutter to fit custom-made garage doors.   CAUTIONThis rubber gasket fits into an  Aluminum seal support profile sold separately

Central hinge for sectional garage door and side garage door (the unit) This hinge joins two panels of a door. It is suitable for residential and industrial doors. Material: steel, white lacquered

These reinforced anchor brackets (or mounting brackets) allow your up-and-over garage door or sectional garage door to be mounted on the wall. Dimension: 45 x 77 x H60 mm Material: galvanized steel Per set of 7 brackets (M8 screws and nuts supplied) Simply bolt these brackets to the studs (usually 3 brackets per side) and attach one to the top rail, then anchor them to the wall.

Roller for up-and-over and sectional garage doors Roller diameter : 45mm Spindle diameter: 10 or 11mm Ball bearing 3 models: Spindles Ø 10mm - Spindles lenght (without roller) 85mm Spindles Ø 11mm - Spindles lenght (without roller) 95mm Spindles Ø 11mm - Spindles lenght (without roller) 150mm   The standard diameter of the roller spindles is 11 mm.For special requests, you can also opt for the 10 mm diameter version.

Nylon double groove ball bearing pulley For shaft Ø10 mm Ø of the pulley 50mm Ball bearing with ABS sumoulage Optional: 1x screw M10x40 + 1x lock nut M10 + 2x thin nuts M10 This double grooved pulley is used on doors with double cables. The nylon pulley is more resistant than a steel pulley, by choosing it you extend the life of your door.

4 Panels insulated 40 mm polyurethane, 2 sides steel Size 500 mm - Type: without groove - Surface appearance: polygonal 8 End caps white lacquered 1 black lip seal + rivets Ideal for renovating an old door   Available in 2 colours white RAL 9016 or Grey RAL 7016 - Door leaf 2400x2000 (4 panels of 2420x500)

Lined tension springs (1 large spring + 1 small B Ø18 inside) compatible with old Spadone garage doors, Maguisa or AGS among others. Several combinations to choose from: B(Ø18) + D (Ø24) => up to 5m². B(Ø18) + E (Ø25) => up to 6m². B(Ø18) + F (Ø26) => up to 7m². 2 Lengths : 715 mm => H Door 900 mm => H Door ≥ 2400

Cable diameter 2mm in galvanized steel Supplied with 2 seals  to form a loop at the end of the cable or avoid fraying. Sinkers can be crimped manually & easily with a hammer. Useful especially for replacing cables on the majority of Wayne Dalton garage doors. Cable cut on demand. Do not hesitate to contact us for a specific need for a long length!

This receiver makes your garage door motor compatible with connected systems. You can open your door, close it and check its status from your smartphone with voice command, on the Meross (Android / iOS) or Apple Home app. Easy to install, it is connected to the motor on the terminals for the push button, a wired sensor detects the position of the door and it is supplied by a power outlet.

Very useful for unlocking your engine from the outside in case of a power outage. Delivered with 2 keys Designed for insulated doors up to 50mm thick. Model LiftMaster 1702EV

Nylon Mobile Pulley Ø 50mm Double Groove delivered assembled with its steel support for use on a door with a single looped spring per side (or double spring) Diameter 50mm Ball bearing Delivered assembled with mobile support A single hole in the center for attaching a single (or double) looped spring Per unit Very durable ball bearing with ABS overmolding very durable (better than the steel pulley)

This toothed belt allows the movement of the motor carriage on the following motors: SOMFY DEXXO PRO 800 and 1000 SOMFY DEXXO SMART 800 and 1000 SOMFY DEXXO OPTIMO 800 and 1000 SOMFY DEXXO COMPACT 600 and 1000 It can be easily cut with wire cutters to adjust to the desired length. Length: 6 meters, width 8mm Sold alone, without accessories