Spare parts for Euronorm

Telescopic Spacing Crossbar 2x1.80 meter (per unit) This crossbar allows you to attach the back of your garage door rails to the ceiling and/or walls. It can extend up to a maximum of 3m. A model of 2x2.40m, which can extend up to 4.2 meters, is available here. As this item is bulky, the delivery time may be slightly extended. Thank you for your understanding.

Telescope Spacing Beam 2x2.40 meters (unit) This spacing beam allows you to secure the back of your garage door rails. It can extend up to a maximum of 4.2 meters. A model of 2x1.80m, which can extend up to 3 meters, is available here, with delivery by Colissimo.

Lock case for up-and-over garage door 60mm center distance For handle square 9x9mm Approx. dimensions 160x60x17mm + 1 plastic spacer + screw on outlet (M6 or M8) Several models: Simple outlet upwards or downwards, Double vertical or horizontal outlets

Suitcase Handle allowing you to manually operate your sectional or sliding garage door. PVC material Supplied with 4 screws 5.5x25mm (handle only) or 4 screws 5x40mm (for the complete set int+ext) Black or white color Attaches to the inside of the door, ideally at least 2 screws should be in a panel reinforcement.

Central hinge for sectional garage door and side garage door (the unit) This hinge joins two panels of a door. It is suitable for residential and industrial doors. Material: steel, white lacquered

Lock box with 1-point locking, used in particular for the gate of the EURONORM CT tilting garage door Square size 8 x 8 mm Designed to accommodate a European cylinder This lock box is reversible. Simply push the bolt all the way in and turn it halfway.

These reinforced anchor brackets (or mounting brackets) allow your up-and-over garage door or sectional garage door to be mounted on the wall. Dimension: 45 x 77 x H60 mm Material: galvanized steel Per set of 7 brackets (M8 screws and nuts supplied) Simply bolt these brackets to the studs (usually 3 brackets per side) and attach one to the top rail, then anchor them to the wall.

Attention: 9mm x 9mmsquare Interior / exterior handle for up-and-over garage door 1 inside handle 1 external handle with square of 9x9mm 2 sizes : L47mm or L85mm 2 adjusting screws included 6x15mm and 6x35mm Supplied without any other accessories Also compatible with Euronorm up-and-over doors

Only for EURONORM CT up-and-over garage doors size 2400x2000H.To replace the 2 big springs which are no longer up to standard:4 springs Type C Ø22mm L715mm2 EURONORM mobile pulleys (with 2-hole supports)2 cables Ø3mm with L3m loop + 2 leads2 EURONORM perforated fasteners2 triangles acc spring EURONORM4 PVC rings

Castor for EURONORM up-and-over garage door with bracket 2 castors Ø 57mm + rod Ø12mm L112mm 2 supports Left and Right 2 axle clips

Cleanliness plate for an up-and-over garage door Centre distance 60mm In black PVC With Spadone logo Dim 175x62x8mm approx. Delivered with screws 5x20 mm & inner counter frame Designed to receive the lock case (not supplied)

Bottom seal cover for EURONORM up-and-over door. It is screwed to the bottom of the door frame. Now in metal (originally in grey PVC)Length approx. 52cm to be cut if necessaryThe pair4 self-drilling screws included

Suitcase handle for hand operation of your up-and-over metal garage door Material PVC Supplied with 1 string Supplied with 2 screws Color: black or blue Fits most metal overhead doors on the market

Up-and-over garage door roller EURONORM CT with axle 2 castors Ø 57mm 2 axes Ø12 / Ø15mm 2 axle clips

Translucent plexiglass porthole for non-insulated up-and-over garage door. 4 screws and M6 bolts included External dimensions: 195 * 380 mm Opening dimensions: 145 * 328 mm

Cables for EURONORM CT up-and-over doors up to 2.4m height 2 Steel cables Ø3mm , L3m with loops 2 Acc. Perforated cable Tilting EURONORM  4 anti-friction PVC washers Supplied with 2 additional seals (if cable cut for intermediate sizes) This cable system replaces the old system and allows you to adjust the tension of the springs.

PVC mobile pulley delivered assembled with its steel support (the whole) Pulley diameter 45mm Designed to hook onto the buckle of the large spring (not supplied) of EURONORM CT doors.

Outer pulley diameter 75mm Pulley composed of an external pulley in PVC + 1 central core + 1 clip Suitable for EURONORM CT and DT doors Sold per pair

These parts allow the rear attachment of the rails to the spacer bar. Their design allows them to slide easily to adjust their position on the spreader bar. Dimension: 54x120mm In galvanized steel Sold in packs of 2 (1 left + 1 right) 6 screws + 6 M8 nuts supplied

These basic anchor brackets (or mounting brackets) allow your garage door to be mounted on the wall. Dimension: 95 x 38 x H38 mm Material: galvanized steel thickness 2mm Per set of 5 brackets (screws not supplied) Simply bolt these brackets to the studs and attach one to the top rail and then anchor them to the wall.

Safety strap for pulley for tilting garage door Euronorm EU PVC Red color Designed for EURONORM doors with hoops equipped with 12mm axle pulley 30x170mm Sold separately, without pulleys The pair