Garage door manufacturer
Product successfully added to your shopping cart
The Cadrea tilting garage door is our most modular model, it is a bare frame, therefore supplied without cladding, to adapt to the most demanding sites with a coordinated covering.
It uses the proven design of the tilting Aura, to support an apron, to be added on site, with a maximum weight of 100 kg.
It is of course motorized, by a ONE operator and two remote controls.
Presentation video  |
Garage door tilting door with cladding with a wood covering of 100kg maximum.
The Cadrea tilting garage door is our most modular model, it is a bare frame, therefore supplied without cladding, to adapt to the most demanding sites with a coordinated covering. Simple to implement in its version without a gate and motorized, it can also be delivered in a version designed to accommodate a gate or in a manual configuration for sites that do not allow the addition of a motorization.
Its frame is entirely powder-coated in the color of your choice, as are the uprights and the upper crossbar. Three cladding layout options are possible with recessed fins (classic), flush or with pre-cladding in 20mm insulated panels.
On the insulation side, the door structure is framed with our ZY profile seals with double lips in order to limit thermal bridges.
On the mechanical side, balancing is provided by two multi-spring arms for greater safety and easy maintenance. Guidance by two horizontal rails and ball bearing rollers provides great operating stability and durability.
This garage door is delivered to you pre-assembled with illustrated assembly instructions and in French, written by our office ;study (see Documentation tab).
Dimensions
Available in 6 standard sizes:
W2400 / 2500 / 3000 mm and H2000 / 2125 mm
or custom-made:
Width from 2000mm to 3500mm
Height from 1850mm to 2400mm
The minimum distance between the mounting brackets is 65 mm to install this up-and-over door (see measurements 3 and 4 of the dimensional drawing).
The lintel drop (measure 5 on the diagram) must be of at least 110 mm for the motorized version and 70mm for a manual version.
Very extensive customization possibilities Gate with 3-point lock 2-point floor locking Anti- fully mechanical lift on the engine Robust mechanics in galvanized and powder-coated steel Motorized with 2 remote controls & very simple settings
The Isola sectional door is a top-of-the-range garage door, made in France, emblem of our know-how.
This sectional door is motorized and insulated 40mm.
It is a door delivered pre-assembled (completely assembled in the factory) or in a pack (assembled in the factory then partially disassembled) depending on the dimensions.
This door is also available in a version with a wicket door .Mezza - Up-and-over garage door
The Mezza up-and-over door is the best alternative to conventional sheet metal stall doors. It is insulated with 20mm sandwich panels, which also gives it more resistance.
This tilting door is also available with a 1-point lock gate and 2 additional optional locks.
It is a standard or custom-made door, delivered pre-assembled (fully assembled in the factory).Aura - Up-and-over garage door
The Aura up-and-over door is a top-of-the-range door with a meticulous finish to satisfy the most demanding needs. It can be insulated 40 or 60mm.
It is of course motorized, by an operator ONE and two remote controls.
The wicket door included in the door is secured by a 3-point hook lock.
It is a door delivered pre-assembled (fully assembled at the factory).
English
Français 
Deutsch 
