Insulating sectional garage door, 2 sides steel 0.35mm polyurethane foam 40 mm.
The Secura sectional door is supplied with single or double castors for custom heights. The pulleys are made of steel. The lip seal at the bottom of the door, with a soft part, perfectly complements the insulation of the 40mm panels.
This garage door is delivered pre-assembled or in a pack (assembled entirely in the factory then partially disassembled for transport) with illustrated assembly instructions in French, written by our design office (see Documentation tab).
Coefficients of thermal resistance
Ud = 0.56 W/m²K for single panel
Ud = 0.95 W/m²K for the complete deck (= assembled panels)
Ud = 1.48 W/m²K for an installed door, taking into account the installation on a standard support.
Dimensions
Available in 6 standard sizes:
L2400 / 2500 / 3000 mm and H2000 / 2125 mm
or custom-made:
Width from 2000mm to 3000mm
Height from 1850mm to 2500mm
The minimum distance between the mounting brackets for this sectional door is 75 mm (see measurements 3 and 4 in the dimensional drawing). The lintel drop must be at least 150 mm (measure 5 on the diagram).
The + products
Excellent thermal and sound insulation
Fully mechanical anti-lift safety device on the engine
No external overflow
Robust steel mechanics
Motorized with 2 remote controls & very simple settings